Brief introduction to ASTM A53 standard
The ASTM A53 standard is one of the most extensively used carbon steel pipe material standards in the oil & gas, structures, constructions, low-pressure plumbing, conveyor rollers, and other process sectors.
ASTM A53 is one of the standards of the American Society for Testing and Materials. The size range for the pipes is from NPS 1/8” to NPS 26”. The wall thickness of the pipes is also mentioned in the standard -astm a53 pipe Schedule 10, astm a53 pipe Schedule 20, astm a53 pipe Schedule 30, astm a53 pipe Schedule 40, astm a53 pipe Schedule 60, and astm a53 pipe Schedule 80. The various types of finishes available for the ASTM A53 pipes are black and hot-dipped, zinc-coated, welded, and seamless.
A53 pipe comes in three types and two grades, A53 Type F, which is longitudinally furnace butt welded or continuous welded (Grades A and B), A53 Type E, which is longitudinally electric resistance welded (Grades A and B), and A53 Type S, which is seamless pipe, produced by hot working, and possibly cold finishing, the steel (Grades A and B). ASTM A53 pipe is sized according to the nominal pipe size (NPS) system. It is commonly available with national pipe thread ends or with plain cut ends. It can be used for steam, water, and air conveyance. It is also weldable and can be used in structural applications, although ASTM A500 tube, which is available in the same NPS sizes, is sometime preferred.
Español
English
